APP Record Settings for Right Adjusted Product ID's

Description: APP Record Settings for Right Adjusted Product ID's There are two table code settings that will need to be adjusted for customers whose product ID’s are right adjusted in their system. Follow the instructions below to change these settings. 1)  Start from the K3S Main Menu and choose option 9.Operations, then choose option 3.Table codes from the next menu, use option 1=Select on Table Code Type APP – Application controls, and then use option 2=Change on Table Code Value PRODUCT   DISPLAY. You should be on the screen pictured below: You will need to make the following changes to APP record PRODUCT   DISPLAY:         Change Flag 1 to 1=ON.         Change Number 1 to the length of the product ID in the customer’s system.         Change Number 2 to the position where the product ID starts in the customer’s system. After you have made your changes press ENTER.                                                                                          2)  To change the other APP record you will need to use option 2=Change on Table Code Value PRODUCT   RIGHT_ADJ. This will take you to the screen pictured below: You will need to make the following changes to APP record PRODUCT    RIGHT_ADJ         Change Flag 1 to 1=ON.         Change Number 1 to the length of the product ID in the customer’s system.      After you have made your changes press ENTER. Next: Decision About how To Backup K3S Libraries Previous: K3S_XRPTCL Exit - After Report Print